SCR型低频橡胶j9集团|j9国际站官网安装说明
SCR Rubber shock absorber Installation instructions

安装前，请确认淞江集团橡胶j9集团|j9国际站官网的型号和规格是否正确。
Before installation,make sure the model and the specification are correct.

安装说明
Installation guide

所需工具：M10、M12、M16、M18、M20开口扳手。
Required tools：M10、M12、M16、M18、M20 open wrenches.
检查附件是否齐全，橡胶j9集团|j9国际站官网是否有缺陷或破损。（如图1）
Check the isolator and other accessories see if they are all completely or having any defects.(Fig 1)
将橡胶j9集团|j9国际站官网放到设备的安装位置。（如图2）
Place the isolator on the correct installation position.(Fig 2)
锁紧螺母和垫片，确保设备和橡胶j9集团|j9国际站官网固定到位。（如图3）
Fasten the nuts and washers to ensure the equipment feet holes are fixed to the isolator.(Fig 3)

SCR型低频橡胶j9集团|j9国际站官网参数表：
SCR type rubber shock absorber parameter table:

图2）将橡胶j9集团|j9国际站官网放到设备的安装位置。
图1）检查附件是否齐全，橡胶j9集团|j9国际站官网是否有缺陷或破损。
Fig 1）Check the isolator and other accessories see if they are all completely or having any defects.

Fig 2）Place the isolator on the correct installation position.

图3）锁紧螺母和垫片，确保设备和橡胶j9集团|j9国际站官网固定到位。
Fig 3）Fasten the nuts and washers to ensure the equipment feet holes are fixed to the isolator.

点击下载：